Results for "torsion assembly"

I pulled into three different campsites this month and my torn slide topper is eating through my gear faster than I can replace it. I've never done anything like this before and I'm worried I might damage the whole mechanism or make things worse.

Can I actually replace just the fabric portion safely, or should I bite the bullet and have the entire assembly replaced by a professional? I'm also concerned about costs - I'm hoping this won't break the bank. If it is something I can do myself, how difficult is it really? I don't want to get in over my head and end up with a bigger problem than I started with.

Can you help me understand the best approach for my specific situation? …more

Already burned through three Dometic 8300 torsion assemblies in six months and I'm hemorrhaging money as a new RV owner. The model number is 834AV44.138 and I'm not even sure what series this is - is it part of the 8300 series maybe?

The torsion assembly lever broke off and I can't seem to find exact replacement parts anywhere. I'm wondering if there are compatible parts from other Dometic awning models that would work with mine? I don't want to order the wrong thing and make the problem worse. Any guidance on finding the right replacement parts or temporary fixes would be really helpful! …more

I tried getting answers about my RV sideswipe damage but my insurance adjuster says it's totaled, three body shops say fixable, and forums are completely split. The coward took off at the highway exit before I could get his plates. Damage is to the bay doors and right front corner cap area - looks pretty ugly but the RV is still drivable. Police never showed up despite multiple calls over 4 hours of waiting. Already filed with insurance and sent photos, but I'm wondering what I should be looking for beyond the obvious visible damage. This is my first accident in 8 years of RVing and I'm stressed about hidden issues I might miss. Any advice on what to inspect or document before the adjuster comes out? …more

Tried getting quotes for my water-damaged RV awning and the $800 replacement estimate has me wondering if I can tackle this repair myself instead. Water pooled on it during a light rain because I had the angle wrong, and now something seems to be wrong with the spring mechanism - it's not retracting properly anymore.

I'm afraid to mess with it further without knowing what I'm dealing with. How can I safely assess whether the fabric, spring, or roller tube is damaged? I need to know if this is something I can repair or if I'm looking at a complete replacement. I don't want to make things worse by trying the wrong approach. …more

Woke up to my electric awning stuck 2 feet short of fully retracting, now I'm standing in the RV parts store staring at motors and alignment tools with zero clue which one I need. During the retraction process, I've observed the fabric bunching up significantly on one side while the opposite side appears to retract normally.

The motor continues to run when this occurs, suggesting it's not a power issue. I suspect this may be related to fabric tension irregularities or potential misalignment in the awning arm mechanism, but I need to confirm the root cause and understand the proper correction procedure.

What are the most likely causes of this partial retraction with uneven fabric bunching, and what systematic troubleshooting steps should I follow to resolve this issue? …more