Results for "tiffin-allegro"

Plumbing Medium 2-4 hours 533 👍 9

RV Water Pump Losing Prime: Troubleshooting & Winterization

Got a 2022 Tiffin Open Road 34PA with a water pump that keeps losing prime during winterization — about to buy a replacement but wondering if I'm throwing money at the wrong problem? I can get it back by quickly opening and closing one of the lowest drain valves, but then it just loses prime again after a while. This has happened on other RVs I've winterized too, but it's particularly stubborn on this Tiffin.

I'm suspecting it might be the inline check valve next to the pump or maybe the one behind the Truma hot water heater, but I'd love some guidance on proper diagnosis. What are the most common causes of prime loss during winterization, and what's the best way to troubleshoot and fix this? I want to make sure I'm covering all my bases for winter storage prep. …more

Read answer

General Medium 30-60 minutes 292 👍 0

RV Liquid Spring Adjustment Guide: Setup & Tuning Tips

Three different adjustment knobs on my 2022 Tiffin Open Road 34PA's LiquidSpring suspension and I'm staring at them with zero clue about the limits.

I've got LiquidSpring suspension on all four corners, but I'm specifically wondering about the rear struts. Can I raise and lower just the rear ones independently, or am I stuck adjusting everything at once like some kind of suspension caveman? I'd love to dial in the perfect ride height and handling, but I need to know if I can fine-tune the back end separately from the front. Between the control panel and what I assume is some fancy smartphone app, surely there's a way to make this old road warrior ride like a dream without turning into a mechanical engineer, right? …more

Read answer

General Easy 30 min maintenance 175 👍 0

RV Slide-Out Maintenance: Complete Guide to Prevent Wear and Extend Lifespan

Before I even finish extending my 2018 Newmar 2702 slide-out, there's this grinding vibration that kicks in during the final positioning phase every single time. The motor works hardest during that last foot of travel when the slide settles into place.

This observation has me questioning optimal maintenance protocols for slide-out longevity. What are the most effective strategies for reducing mechanical wear on these systems? I'm particularly interested in understanding proper usage frequency, seal maintenance requirements, and whether partial extension during routine tasks like cleaning provides any protective benefits.

Looking for comprehensive guidance on preventive maintenance practices, lubrication schedules, and storage considerations that will maximize slide-out system lifespan while minimizing premature component failure. …more

Read answer

Product Ranking 8 compared

Best RV Refrigerators

4.3 (9,200 reviews)

General Medium 4-8 hours 168 👍 0

How to Reduce RV Interior Noise: Complete Sound Dampening Guide for Motorhomes

Despite having a 2021 Coachmen Mirada, looking at my sound meter right now and there's 69 decibels of highway noise blasting through the cabin. My target is to achieve approximately 65 decibels for better communication with passengers.

I need a systematic approach to interior noise reduction. What are the most effective sound dampening materials and techniques for motorhomes? Specifically, I'm looking for solutions that address engine noise transmission, road noise, and any rattling components that contribute to the overall sound level.

What realistic noise reduction can I expect from proper sound deadening implementation, and what are the key areas to focus on for maximum impact? …more

Read answer

General Easy N/A - shopping 140 👍 0

Independent Super C Motorhome Manufacturers: Complete Guide to Non-Thor Builders

Three months of shopping and my wife just pointed out every Super C we're considering comes from Thor subsidiaries, making me realize consolidation might be trapping us with limited service options. It seems like Thor Industries and Berkshire Hathaway own practically every major motorhome brand out there now.

Before I make what could be a costly mistake, I need to know - are there actually any independent Super C manufacturers left that aren't owned by these corporate giants? I'm cautious about putting all my eggs in one basket with these mega-corporations. Should I even care about the ownership structure, or am I overthinking this? I just want to make sure I have options and aren't setting myself up for problems down the road. …more

Read answer

Engine Easy N/A - informational 138 👍 0

Toyo vs Michelin RV Tires: Complete Comparison for Diesel Pusher Motorhomes

Planning to replace the tires on my 2019 Tiffin Phaeton 40IH, and ever since I started getting quotes, everyone keeps suggesting Toyo as a cheaper alternative to Michelin.

I'm honestly a bit overwhelmed by all the tire choices and wondering if I'd be making a mistake switching brands. Will Toyo tires give me the same ride quality as the Michelins? I've heard you can save quite a bit of money, but I don't want to compromise safety or comfort since we're still learning how to handle this big rig.

Would really appreciate some guidance from those who've made this switch - are you happy with the decision or do you regret not sticking with Michelin? …more

Read answer

General Medium 4-8 hours 128 👍 0

How to Remove and Replace Cracked Factory Protective Film on RV Front Cap

Staring at my newly purchased older Newmar motorhome with factory protective plastic coating cracked and peeling everywhere on the front cap. The coating has been on there for years and is now showing significant cracking, peeling, and deterioration that's making the RV look pretty rough. I understand this was a common factory option to protect the paint from road debris and bug damage, but it's clearly past its useful life.

As someone who enjoys DIY projects and wants to restore this coach to better condition, I'm wondering about the feasibility of removing this old protective film myself and either replacing it with something newer or just maintaining the bare paint underneath. What's the proper process for safely removing aged factory protective coating without damaging the underlying paint? Are there modern alternatives I should consider for replacement, and what tools and materials would I need for this type of project? I want to make sure I approach this methodically to get the best results. …more

Read answer

Engine Medium 1-2 hours 118 👍 0

Ford F53 Chassis Bump Stop Replacement - Missing or Broken Front Leaf

Despite replacing F53 chassis bump stops twice already this season, my 2021's driver's side front leaf spring bump stop has completely vanished again and I'm done guessing. Just... gone. Vanished into the ether.

I'm seeing a bunch of aftermarket polyurethane bump stops on Amazon and other places, but honestly not sure if I should just bite the bullet and get the Ford OEM part or if there are better options out there. Also wondering if I should be checking the other side too - seems like these things might be prone to failing?

Anyone dealt with this before? What's the move here - stick with factory or upgrade to something beefier? …more

Read answer

Slideouts Hard Professional may be needed 117 👍 0

Tiffin Phaeton Atwood Levelegs Won't Fill Airbags: Troubleshooting Guide

Around 85°F, my 2008 Tiffin Phaeton with Atwood Levelegs refuses to fill the airbags for leveling — works perfectly in cooler weather. The coach is sitting low and I can't get it to fill the airbags properly. One of my leveling jacks isn't working right now.

Are the Levelegs and air suspension connected systems? What should I check to get my coach to raise up so I can drive safely? Is this something I can troubleshoot myself or do I need professional help? …more

Read answer

Appliances Easy 10 minutes research 117 👍 0

Can You Run an RV Dryer on 30 Amp Shore Power? Complete Guide

Already dealing with my 2019 Forest River's 4-year-old dryer constantly tripping the breaker — should I repair it or just replace with something more 30-amp friendly? We have a 2024 Tiffin Open Road and I'm not sure if I can use the dryer when we're plugged into a 30 amp hookup at campgrounds.

I've heard mixed things about whether dryers work on 30 amp service or if you need 50 amp. Some people say it depends on the dryer type? I'm honestly not even sure how to tell what voltage our dryer is or what that means for power requirements. Any guidance would be really appreciated! …more

Read answer

Ac Refrigeration Easy 30 minutes 113 👍 0

Best RV Refrigerator Door Latch Replacement Options: Complete Guide 20

According to Murphy's Law, our RV's refrigerator door latch completely gave out just days before our big family reunion trip this weekend! The plastic latch on my residential Whirlpool refrigerator door has given up the ghost, and now I'm living in constant fear of opening the door to find my condiments have taken a scenic tour of the RV floor.

I know this has to be a rite of passage for pretty much every RV owner out there. What are the best aftermarket options to replace these flimsy factory latches? I've seen magnetic catches mentioned, and Camco seems to make everything RV-related, but I'd love to hear what actually works long-term. Bonus points if it doesn't look like I jerry-rigged my fridge with whatever was lying around the campsite! …more

Read answer

Product Ranking 8 compared

Best RV Generators

4.6 (18,900 reviews)

Solar Batteries Medium 2-4 hours 110 👍 0

Xantrex RV3012GS Inverter Repair: Expert Solutions & Alternatives

Xantrex RV3012GS inverter is throwing a fault code and the repair shop wants $2,800 to fix it. Inverter is 8 years old and I'm debating between repair, buying a refurbished unit, or upgrading to something newer. What are my realistic options here? …more

Read answer

Ac Refrigeration Medium 1-2 hours 108 👍 0

Coleman RV AC Remote Sensor Wrong Resistance: Troubleshooting Guide

Our 2013 Phaeton's Coleman AC remote sensor is throwing wrong resistance readings and I've got my multimeter ready to fix this myself — just need the correct values to check against. The remote temp sensor in my living area started reading 99°F constantly, so I checked the resistance and found it was only 9kohms while the working sensor reads 90kohms at 82°F.

I ordered the replacement part 8330-3101 (which supposedly replaces my old 8330-309), but I'm worried because the new sensor ALSO measures 9kohms right out of the package - exactly like my "bad" one. I've tested both thermostats and they work fine when I swap the sensor leads.

I'm hesitant to install this new sensor since the resistance seems wrong. Could I damage my thermostat or AC system if there's a compatibility issue? Should I be measuring resistance differently, or is there a wiring problem I'm missing? I don't want to make things worse by installing the wrong part. …more

Read answer

General Easy N/A - finding a shop 107 👍 0

Best RV Front End Alignment Shops in Seattle - Class A Motorhome Service Centers

Before backing out of the driveway this morning, I noticed our new Class A Winnebago pulling hard to the right when it was tracking perfectly straight yesterday. Most regular tire shops take one look at this beast and say nope!

Anyone know good spots in the Seattle area that actually have the right equipment for Class A rigs? Getting tired of white-knuckling it down the interstate when a semi passes by. …more

Read answer

Engine Medium 3-4 hours 105 👍 0

RV Coolant System Maintenance: Spring Clamps vs Worm Gear Clamps Explained

This morning I'm standing in the RV parts aisle staring at spring clamps and worm gear clamps for my 2013 Tiffin F-53 coolant flush with no clue which ones I actually need. The current spring clamps look good - no rust, seem like new condition. Should I reuse these spring clamps or upgrade to worm gear clamps? Also replacing all the hoses while I'm at it. …more

Read answer

Loading more Q&A...

You've seen all 24 Q&A articles!