Results for "spacemaker"

I tried everything I could think of, but after all that heavy rain last week, my slide out went from smooth operation to moving like molasses. It sounds like it's really struggling and straining, making these awful grinding noises that have me worried I'm going to break something expensive.

I've been reading that lubrication might be the answer, but I honestly don't know where to start. Should I be looking at the motor mechanism? The tracks? I've heard about hydraulic fluid but I'm not sure if my system is hydraulic or electric. I really need someone to walk me through what needs lubrication and what else I should check before this thing stops working completely!

Could you help me troubleshoot? Details that might help: Can you tell me the specific model of my RV and the type of slide out system it uses? …more

Wondering why my 2008 Winnebago Adventurer 38J's HWH 625S slide out won't budge after replacing the solenoid, cleaning connections, and checking fluid levels? The passenger slide won't extend or retract from the wall switch, but when I manually operate the solenoid valves, the slide moves perfectly in both directions.

I've already replaced the solenoid valves, so I know they're good. The problem seems to be that power isn't reaching the solenoids from the switch - everything routes through the control box first.

Can I safely bypass the HWH control box by connecting the switch wires directly to the solenoid wires? What should I check before attempting this bypass? …more

Replaced my HWH slide's hydraulic hose last month and now it's spraying fluid everywhere again with our three-week cross-country trip starting Friday! My 2007 Monaco Dynasty with HWH hydraulic system decided to throw me a curveball when the bedroom slide hydraulic line (1/4" I.D.) decided to spring a leak. After some detective work (and a lovely puddle of ATF to mark the spot), I traced it back to where a 1" air line to the front caliper had been playing the world's slowest game of 'saw through the hydraulic hose' for who knows how many miles.

I temporarily patched with Gorilla Tape and 1/2" hose clamps, which got the slide almost closed but still creeping. I'm planning to fix this with a compression coupling since that seems like the most straightforward approach for a DIY repair. Two quick questions: Can anyone confirm the 1/4" I.D. hose size for HWH systems? And once I get this coupling installed, will I need to bleed the system, or does it sort itself out? I'm hoping this repair goes smoother than my attempts to explain to my spouse why we're currently camping with a slide that's permanently 'almost' closed! …more

Every time we get heavy rain like those three days last week, my HWH Spacemaker hydraulic slide system motor runs but won't extend the slide out. The motor runs when I hit the extend button, but the slide absolutely will not move out. Everything else works perfectly - rear slide operates fine, leveling system works great, no blown fuses anywhere.

I've tested the extend solenoid and it's getting power, did an ohm test which showed 1.2 and open (which appears acceptable per the manual). I've already checked the converter box and solenoids and they look good. The safety locks are fully retracted so that shouldn't be the issue. I can hear the motor operating but there's zero movement on the slide itself.

I'm really hoping someone can point me in the right direction here. What are the most common causes when the motor runs but nothing happens? Should I be focusing on hydraulic leaks or is this still likely a solenoid problem even though it tested okay? …more