Results for "obsolete parts"

Engine Hard 4-6 hours 160 👍 0

How to Replace Obsolete F53 Chassis ABS Control Module - Ford Discontinued Repairs Guide

Last week my 2013 Coachman Encounter's F53 chassis started throwing ABS codes — can't afford the $3,000+ dealer quote so is there a DIY fix under $500? Our ABS control module failed, creating a no brakes issue. After being towed to a Ford Dealership on May 28th, the repair has been incredibly complex. They've received incorrect and damaged modules, and even after claiming to fix it, the ABS warning light remains on and reprogramming attempts have failed.

Ford apparently no longer makes this module for units over 10 years old. What alternatives exist for finding a compatible ABS control module for my older F53 chassis when OEM replacement isn't available? …more

Read answer

Engine Easy N/A - finding shop 139 👍 0

Ford F53 V10 RV Chassis Repair Shops Near Raleigh NC - Engine Service

My Ford F53 V10 is showing misfire codes P0301 and P0303, but my compression test reads 180 PSI when everything says it should be around 150 PSI. I'm located near Raleigh, North Carolina, and I need to get some mechanical work done - specifically repairs to the exhaust manifold bolts and air conditioning system work.

The problem I'm running into is that when I call Ford dealerships in the area, they keep telling me they don't work on motorhomes, even though it's a Ford chassis. This seems crazy to me since the engine and drivetrain components should be the same as other Ford vehicles. The exhaust manifold issue and AC problems are fairly standard automotive repairs, so I don't understand why the Ford connection isn't helping me here.

What type of repair facilities should I be looking for instead? Are there specific shops or service centers near Raleigh that specialize in F53 chassis work, or should I be approaching this differently? I just need somewhere that can competently handle these mechanical repairs on my motorhome without the runaround. …more

Read answer

Engine Easy 20 min read 129 👍 0

RV Wheel Alignment Guide: Warning Signs, Cost & When to Get Service

This Class A Freightliner Chassis alignment I finished yesterday still pulls hard left through those tight campground turns — did I mess something up? who knew? 🙄

Now I'm dealing with some funky tire wear patterns and my rig seems to have developed a mind of its own on the highway - it's pulling to one side like it's trying to make an unscheduled scenic detour. I'm pretty sure I need a wheel alignment, but honestly, I have no clue what warning signs to look for or how often this service should be done.

What are the telltale signs that scream 'GET AN ALIGNMENT NOW!'? I'm specifically looking for recommendations near Glendale, AZ, and I've heard mixed things about Bell Road RV. How do I find a shop that actually knows what they're doing with big rigs like my Freightliner? And what should I expect to pay for this delightful reality check? Any guidance would be awesome before I end up as one of those viral RV fail videos! …more

Read answer

Product Ranking 8 compared

Best RV Propane Accessories

4.5 (11,200 reviews)

Engine Medium 1-2 hours 129 👍 0

Ford F53 V10 Bypass Oil Filter Installation: Best Mounting Locations for RV Chassis

Walked out to check my oil analysis results and they're showing 15-micron contaminants, but everything says my 2003 F53 V10's factory filter catches down to 25 microns. I've been reading about how these can help extend oil life and keep things cleaner, but I'm honestly not sure where the best place to mount one would be.

I've seen some people mention sandwich adapters at the original filter location, remote mounting blocks, and even tapping directly into the engine block. As someone who's still learning, I don't want to mess this up or create problems down the road. What's considered the best practice for mounting location on the F53 V10? I'd really appreciate some guidance from those who have done this before. …more

Read answer

Engine Medium 2-4 hours for custom fabrication 123 👍 0

F53 V10 Water Ingestion Fix When Ford Parts Discontinued

Our '99 F53 chassis with the V10 engine hasn't run right ever since we got caught in that torrential downpour last month and now we're dealing with water ingestion issues. I've experienced hydro-lock issues in severe downpours, and I know Ford issued Technical Service Bulletin 04-24-22 specifically addressing this air intake design flaw on the '99 to '04 F53 models. The TSB called for replacing the air intake horn and modifying the intake strap to prevent water from being sucked into the engine during heavy rain conditions.

The problem is that when I contacted my Ford dealer, they told me the critical air intake horn part specified in TSB 04-24-22 has been discontinued and is no longer available. The modified strap is still available, but without the new intake horn design, I'm still vulnerable to water ingestion during storms. With extensive travel plans ahead where I'll likely encounter severe weather, I need a reliable solution to protect my engine from hydro-lock.

What are my options for addressing the F53 V10 water ingestion problem when the original Ford TSB parts are no longer available? Are there aftermarket solutions or modifications that other F53 owners have successfully implemented to solve this issue? …more

Read answer

Engine Medium 3-4 hours 122 👍 0

Ford F53 Chassis Misfire Problems: Early Spark Plug & Coil Failure Solutions

Walked out to my 2021 Class A motorhome this morning facing the third Ford F53 chassis misfire this year and I'm done throwing parts at it blindly. We've got less than 20,000 miles on the odometer, but recently experienced rough running and got a check engine light. When I took it to a Ford dealer that services Class A rigs, they diagnosed misfires in two cylinders and recommended servicing the entire fuel system. I ended up having them replace all eight spark plugs, plug wires, and ignition coils since we were already dealing with failures.

The coach now runs better than it ever has since new, which makes me think the original components may have been subpar from the factory. What's really bothering me is that we shouldn't need major ignition system work this early in the vehicle's life. I'm curious if other owners of 2021 or newer F53 chassis motorhomes have experienced similar premature failures with their spark plugs, ignition coils, and plug wires? Is this pointing to some kind of quality control issue with Ford's ignition components on these newer chassis, and should I expect better reliability from aftermarket replacements going forward? …more

Read answer

General Easy 30 min research 121 👍 0

2001 Fleetwood Flair Parts: Complete Guide to Finding OEM & Replacement Parts

Pulled into my driveway after my local RV dealer closed down last year, and now finding OEM parts for my 2001 Fleetwood Flair 33R has become a complete nightmare. Ford has discontinued so many of the OEM components I need, and the usual RV parts suppliers keep coming up empty. I've been searching for months now and I'm starting to worry I'll never get this thing roadworthy again.

I know there have to be salvage yards out there with Fleetwood parts, but I don't know where to look or how to search effectively. Are there online platforms specifically for RV salvage? How do you even cross-reference parts when the original numbers are discontinued? I'm willing to try anything at this point - used parts, aftermarket alternatives, whatever works. Someone please tell me there's a systematic way to track down these elusive components! …more

Read answer

Engine Easy 15 min visual, 1 hour full 120 👍 0

Ford F53 Motorhome Brake Inspection: Complete Guide to Checking Rotors and Pads

Turned onto that steep mountain grade last week and heard grinding from my 2014 F53 chassis, but I can't figure out how to properly inspect the brake pads and rotors. I've been crawling around under there, contorting myself into every possible position, but I just can't get a good view of the brake components through the wheel openings.

Is there a specific technique or approach that actually works for getting a proper look at the pad thickness and rotor condition? I really want to stay on top of brake maintenance, but the limited visibility is making this nearly impossible. Should I be using special tools, or is there a better method I'm missing? …more

Read answer

Engine Medium 1-2 hours 118 👍 0

Ford F53 Chassis Bump Stop Replacement - Missing or Broken Front Leaf

Despite replacing F53 chassis bump stops twice already this season, my 2021's driver's side front leaf spring bump stop has completely vanished again and I'm done guessing. Just... gone. Vanished into the ether.

I'm seeing a bunch of aftermarket polyurethane bump stops on Amazon and other places, but honestly not sure if I should just bite the bullet and get the Ford OEM part or if there are better options out there. Also wondering if I should be checking the other side too - seems like these things might be prone to failing?

Anyone dealt with this before? What's the move here - stick with factory or upgrade to something beefier? …more

Read answer

Engine Easy 30-60 minutes at dealer 117 👍 0

Ford F53 AdvanceTrac Warning Light: TSB Software Fix for Motorhomes

Already seeing that AdvanceTrac warning light on my F53 motorhome chassis — would this TSB software fix be covered under my extended warranty before I start tearing into it? Because apparently my RV decided it needed MORE personality quirks, right? Now my cruise control won't work (there goes my lazy highway driving), and the hill assist is MIA too.

I'm getting mixed signals here - is this one of those "pull over immediately and call a tow truck" situations, or more of a "well, that's annoying but I can still get to the campground" kind of deal? And please tell me this isn't going to cost me my firstborn child to fix at the dealer! …more

Read answer

Engine Hard Several days to locate parts 115 👍 0

Ford F53 V-10 ECU 7C3A-12A650-DSC Replacement Sources

ECU died on my Ford V10 and the replacement part number 7C3A-12A650-DSC is discontinued from Ford. Salvage yards want $800 for a used one with no guarantee it'll work. Need to find a reliable source for this specific ECU or figure out what alternatives exist. …more

Read answer

Product Ranking 8 compared

Best RV Water Heaters

4.4 (6,800 reviews)

Engine Easy Informational 111 👍 0

Cummins Onan Generator Service: What to Do When Dealers Won't Service

Called three Cummins dealers about servicing my 12-year-old Onan generator and they all said it's "too old," but my neighbor's same-age unit gets serviced just fine. My generator is about 12 years old and needs some work done on it.

I'm feeling a bit overwhelmed - are there other options for getting older Onan generators repaired? I'm worried I won't be able to find anyone to work on it or get parts. Any guidance would be really appreciated since I'm not sure where else to turn for service on older equipment like this. …more

Read answer

Solar Batteries Medium 2-4 hours 109 👍 0

Xantrex RV3012GS Inverter Repair: Expert Solutions & Alternatives

Xantrex RV3012GS inverter is throwing a fault code and the repair shop wants $2,800 to fix it. Inverter is 8 years old and I'm debating between repair, buying a refurbished unit, or upgrading to something newer. What are my realistic options here? …more

Read answer

Engine Medium 2-3 hours 108 👍 0

Ford F53 460 EGR Valve Cleaning Guide - Fix Motorhome Stalling Issues Now

Despite probably being a dumb question, why does my 1997 Ford F53 with the 460ci keep being such a real pain lately? Keeps stalling out when I'm sitting at lights or just idling around. This happens every 400-600 miles like clockwork - runs great for a while, then boom, stalling starts up again.

I'm pretty sure it's the EGR valve getting all carboned up because I've seen this pattern before. The thing is, I'm getting tired of dealing with this over and over. Should I just clean the EGR valve again, or is there a better long-term fix? I've heard people talk about EGR deletes but not sure if that's the way to go with the ECU and all that. …more

Read answer

Engine Medium 1-2 hours to identify 106 👍 0

2001 Ford F53 Firewall Module Identification: GEM, ICM & Fuel Pump Driver Guide

According to my spring ritual of firing up my 2001 Ford F53 for camping season, that same firewall electrical module overheats until the black plastic housing cracks. Looks pretty well cooked!

The part number isn't readable anymore thanks to the heat damage, and my local Ford parts counter is stumped. It's definitely some kind of power module since it has that chunky heat sink attached. Anyone know what the common firewall modules are on these F53s? I'm thinking it might be something like a GEM or ignition module, but honestly not sure what I'm looking at here. …more

Read answer

Loading more Q&A...

You've seen all 27 Q&A articles!