Results for "garage door"

Despite protecting my RV all winter, those brutal summer months have absolutely destroyed the paint on my four basement doors and rear wheel area across 2' x 20', leaving me staring at a $5,000-6,500 shop estimate versus DIY with my compressor. I've never done automotive paint work before. Could I really achieve decent results for under $500 like I keep reading online? I'm concerned about proper paint matching, whether I'll damage the surface during prep, and if I choose the wrong spray gun or technique.

Has anyone successfully tackled RV exterior panel paint repair as a DIY project? I need reassurance that this is actually doable without professional training, and guidance on the complete process from start to finish. …more

Already tried everything but my RV's LP gas detector has false alarms in the garage, keeps beeping at random times, AND won't reset properly. Even with the LP tank completely shut off, the alarm still goes off within hours. It's located in the bottom of the fridge cabinet.

I've checked everywhere for actual leaks - can't smell anything, and all my appliances still light immediately when I take the RV out. The detector seems fine outside but becomes a nightmare indoors. I'm wondering if it's the sensor going bad, poor placement, or if there are other things that can trigger these detectors besides actual propane leaks?

I really need a complete breakdown of what causes these false alarms and how to fix this issue once and for all. Should I be looking at replacing the detector entirely, or are there troubleshooting steps I'm missing? …more

Finally facing the inevitable with my 1994 Fleetwood Jamboree Rallye garage doors that are 30 years old and completely delaminating at the seams — repair or replace? The extruded aluminum frame corners that are supposed to be screwed together are failing because the screws keep breaking under stress. What started as minor separation has now progressed to the point where the structural integrity of the entire door system is compromised.

I've noticed that not only are the corner joints failing, but the door panels themselves seem to be separating from their backing material, and the weather seals around the perimeter are starting to pull away as well. The doors don't close properly anymore, leaving gaps that let in water and debris. I'm concerned about further damage to the garage area and contents if I don't address this comprehensively.

I need a complete repair approach that addresses the delamination issue, reinforces the structural components, and replaces the failing seals. Simply adding corner braces feels like a band-aid solution, and I'm worried about drilling out the broken screws without causing more damage to the aluminum frame. What's the proper way to tackle this type of comprehensive garage door repair on an older RV? …more

Opened up my motorhome and I'm staring at this hideous generic wall art — but before I start ripping it down, would that void my interior warranty? Since I'm only using it for 20-30 days a year, I'm wondering about the best approach to personalizing my space. I've noticed these factory pictures are pretty standard across RVs, but I'm curious how others handle this.

I'm worried about damaging walls or creating safety hazards while driving. The current pieces seem attached with velcro or screws, but I'm not sure how to remove them properly. More importantly, I want to understand weight limits and what materials are safe for RV walls. When I tried hanging a regular glass-framed photo last month, it rattled terribly going down the highway - clearly not the right approach!

Have other RV owners, especially those who are full-timers or occasional campers, replaced their standard artwork? What's the best way to remove existing mounted pieces and replace them with lightweight alternatives that won't become projectiles when traveling? …more

Standing in my 2016 Itasca Navion 24G, I discovered the previous owner left me with a completely shot Norcold N3150 refrigerator. The fridge is struggling big time in hot weather, with temperature swings up to 50-60F, and I'm tired of playing refrigerator roulette every trip. I'm running 200W of solar and 2 Golf Cart 6V batteries, and I do a lot of driving through Southern California deserts where temperatures hit 110F.

Been doing some research and keep seeing two main options - the NovaKool RFU6406D with dual compressors, or sticking with absorption and going with something like the Norcold N2175. I'm particularly interested in a setup that'll keep things cold when it's scorching outside and provide reliable cooling performance.

What's the real-world difference between these two approaches, and which one's gonna give me better performance in those extreme desert heat situations? …more

Wondering if anyone's dealt with fading paint, oxidation streaks, AND chalky residue covering their entire RV exterior before trusting Carlos at Reef RV Park? I have a 2004 Winnebago Adventurer and need the storage compartment doors painted on the driver's side (about 2'x28' section). I also have clear coat peeling on my front and rear caps. The quotes I'm getting in the US are absolutely crushing - $5,500 to $6,500 just for the doors!

I've heard about Carlos at The Reef RV Park in Puerto Penasco (WhatsApp: +52-638-105-6894) who does paint work for way less. His initial quote was $1,400, which expanded to $2,500 for additional work including painting front/rear caps and fixing a slideout lip.

Communication can be tricky - it took multiple attempts to connect with him. Reserving at The Reef RV Park was also challenging (pro tip: use Gmail for reservations).

Has anyone actually taken the risk and gotten work done here? I completed the work and was surprisingly pleased. Carlos worked in a basic metal shop with a dirt floor, yet produced impressive, nearly flawless results. While there was a barely noticeable small paint sag, the overall quality exceeded my expectations.

Is this a viable option for RV paint work? In my experience, absolutely yes. …more

According to my old Class C setup this same hitch rating confusion was easily solved with basic math — but towing a Jeep behind this Class A motorhome has me worried about weight limits and legal liability. After checking the Jeep website, I noticed that most Jeep models weigh over 5100 lbs, which seems to exceed typical 5000 lb hitch ratings. Could this potentially expose RV owners to liability if something goes wrong during towing? I want to understand the weight implications and safety considerations before hooking up a vehicle. Does this mean most Jeep owners towing with a gasser Class A might be inadvertently exceeding safe towing limits? …more

This dangerous sewer smell is seeping into my Newmar Bay Star 3826 where my kids are sleeping—could the black tank vent pipe routing be putting my family at risk? I can trace the half bath black tank vent line running through or adjacent to the electrical cabinet area, but I require confirmation of this routing.

The rear bathroom black tank vent pathway is less apparent during my inspection. I need to identify where this vent line routes from the tank connection point up to the roof termination. Understanding both vent pipe locations is critical for proper system maintenance and troubleshooting potential blockage issues. …more

Came back from dinner to find someone had sideswiped my RV in the campground parking lot and took off. Damage runs along the entire passenger side — fiberglass is cracked, trim is torn off, and the compartment door won't close. Need to figure out repair vs insurance claim vs total loss. …more