Results for "ford v10"

Engine Easy N/A 260 👍 0

Ford E-350 vs E-450 Chassis: RV Fuel Economy, Power & Weight Capacity

Last weekend I felt this awful engine strain and heard sluggish acceleration sounds while test-driving a 2017 Phoenix Cruiser #2351 with its E-350 chassis and V10 engine. I'll be doing extensive western touring through mountain and plains regions, which means substantial mountain grades and wind challenges. I'm comfortable driving slowly and want to understand two key things: 1) Will this E-350 chassis handle mountain grades without major issues, and 2) What's the real-world fuel consumption like? I plan to do an initial inspection this weekend, followed by a third-party mechanical review. I'm not overly concerned about fuel economy but want to understand the actual performance limitations. I'd appreciate insights from owners who have experience with similar touring conditions on an E-350 chassis. …more

Read answer

Engine Easy 1-2 hours inspection 255 👍 0

Ford E450 V10 Reliability: Expected Mileage and Longevity Guide for RV Owners

Nobody prepared me for staring at this 2018 Jayco Greyhawk 29MVP with Ford E450 chassis showing 54,000 miles and wondering if I'm looking at a money pit. The unit appears well-maintained with quality features including auto-leveling, fiberglass roof and nose, plus J-ride suspension. However, the odometer shows 54,000 miles, which exceeds my initial target range.

I need to assess whether this mileage represents significant wear on the E450/V10 drivetrain combination. What is the typical service life expectation for these engines when properly maintained? At what point should mileage become a primary concern versus overall mechanical condition? …more

Read answer

Engine Easy 45 min 248 👍 0

Femco vs Fumoto Oil Drain Valves for RVs - Which is Better?

Looked at my mechanic's quote for a $300 professional oil change setup and something seems off—wouldn't a basic Femco or Fumoto drain valve work just fine? I've narrowed it down to Femco and Fumoto, but I'm genuinely worried about road debris damage since RVs sit lower and encounter more hazards than regular vehicles.

The thought of a drain valve getting hit by rocks or debris and causing a catastrophic oil leak on the highway keeps me up at night. I need to know which design is actually safer and more protected in RV applications. Does one have better protection features than the other? I'd rather be overly cautious than deal with a roadside emergency. …more

Read answer

Product Ranking 8 compared

Best RV Batteries

4.5 (15,400 reviews)

Engine Easy N/A 211 👍 0

Ford V10 Triton Engine Maintenance Guide: EGR Delete vs Regular Service Tips

Spent years doing regular EGR maintenance on my old gas motorhome without issues — but this 2007 Fleetwood 31' Tioga with Ford V10 Triton has me second-guessing everything. I keep reading conflicting information about EGR delete procedures on V10 engines, and I'm worried I might make things worse if I mess with it.

Is the EGR delete modification actually necessary on this 2007 3-valve V10, or am I overthinking this? I don't want to void any warranties or create problems that weren't there before. Would I be better off just sticking to regular maintenance instead of modifications? I'm looking for reassurance that I'm taking the right approach to keep this engine running reliably for years to come. …more

Read answer

Engine Hard 2-3 hours for diagnosis 208 👍 0

1999 F53 V10 Oil in Coolant: Complete Head Gasket Diagnosis & Repair Guide

Called three dealerships about warranty coverage for oil contamination in my 1999 Ford F53 V10's coolant system — before I tackle this head gasket nightmare myself. The unit overheated after the oil level dropped significantly, though it still starts and runs without throwing any codes.

Based on the symptoms, I suspect a blown head gasket, but I want to perform proper diagnostic testing before committing to a major repair. What specific diagnostic procedures should I run to confirm whether this is actually a head gasket failure versus other potential causes like a cracked head or block issue?

Looking for a systematic approach to pinpoint the exact problem before I start tearing into this engine. …more

Read answer

Engine Hard Not recommended 207 👍 0

Ford V10 Turbo Kit for Motorhomes: Cost, Risks & Better Alternatives

Before every camping season rolls around, I face the same dreaded reality with my Ford V10 motorhome crawling up mountain passes like a wounded turtle. What are the realistic costs involved? Are there major risks to the engine I should know about? Is this actually worth doing or should I look at other options? …more

Read answer

Engine Medium 2-3 hours 158 👍 0

Ford E450 Inertia Switch Location Guide - Find Your RV's Fuel Cutoff Reset Point

Every Ford E450 I've worked on had the inertia switch behind the driver's panel — but my 2011 Freedom Elite 32r has it hidden somewhere completely different. The engine is experiencing what appears to be fuel delivery issues after a minor fender bender, and I suspect the inertia switch may have been triggered and needs to be reset.

I've already done extensive searching in the typical locations - removed both driver and passenger side kick panels completely, pulled out the glove box, and even partially disassembled sections of the dashboard. Despite checking all these common spots where Ford usually places these switches, I'm coming up empty-handed.

Could the switch be integrated into another component on this particular year and model? Are there any alternative locations specific to the E450 chassis or Freedom Elite configuration that I should be checking? I'm also wondering if some models of this year might not have a traditional standalone inertia switch at all. …more

Read answer

Ac Refrigeration Medium 2-3 hours 149 👍 0

Ford V10 RV Chassis A/C Cycling On and Off at High RPM - Complete Fix

Before highway driving yesterday, my gauge showed 250 PSI on the high side, but every Ford V10 manual says my 2019 Georgetown XL should max at 200 PSI. After completing full refrigerant system service including line replacement, receiver-drier, and expansion valve replacement, followed by proper evacuation and R134a charge to specification (920g), the system operates normally at idle and low RPM conditions.

However, above 2800 RPM during highway driving, the compressor cycles on and off repeatedly. System pressures appear normal during stationary testing. Is this cycling behavior a designed protective feature of the Ford V10 PCM during high load conditions, or does this indicate an underlying issue with head pressure, airflow, or refrigerant charge that requires further diagnosis? …more

Read answer

Engine Easy 15 minutes 142 👍 0

5 Star Tuner X4 for Ford V10 RV: Complete Performance & Upgrade Guide

Planning to tune my 2018 Ford 6.8L V10 RV but got quoted $800 for professional tuning and wondering if the 5 Star X4 is DIY-friendly. Specifically want to know about real-world performance improvements - does it actually improve throttle response and shift points? What about fuel economy gains?

Which of the 3 programs works best for RV towing? Is the investment worth it for better drivability or just hype? …more

Read answer

Engine Easy N/A - finding shop 140 👍 0

Ford F53 V10 RV Chassis Repair Shops Near Raleigh NC - Engine Service

My Ford F53 V10 is showing misfire codes P0301 and P0303, but my compression test reads 180 PSI when everything says it should be around 150 PSI. I'm located near Raleigh, North Carolina, and I need to get some mechanical work done - specifically repairs to the exhaust manifold bolts and air conditioning system work.

The problem I'm running into is that when I call Ford dealerships in the area, they keep telling me they don't work on motorhomes, even though it's a Ford chassis. This seems crazy to me since the engine and drivetrain components should be the same as other Ford vehicles. The exhaust manifold issue and AC problems are fairly standard automotive repairs, so I don't understand why the Ford connection isn't helping me here.

What type of repair facilities should I be looking for instead? Are there specific shops or service centers near Raleigh that specialize in F53 chassis work, or should I be approaching this differently? I just need somewhere that can competently handle these mechanical repairs on my motorhome without the runaround. …more

Read answer

Engine Medium 2 hours 132 👍 0

Ford V-10 Misfire Codes P0305 & P0307: Complete RV Engine Repair Guide for Motorhomes

Turned my compression tester on cylinders 5 and 7 and got 150 PSI readings, but I'm still pulling P0305 and P0307 misfire codes on my 2001 Ford E350 V-10. The engine runs smoothly overall, but the diagnostic codes are persistent.

I have replacement spark plugs and ignition coils available but want to ensure I'm following the proper troubleshooting sequence before investing time and effort. What is the recommended diagnostic approach for simultaneous misfires on cylinders 5 and 7?

Given that multiple cylinders are affected, should I prioritize certain components over others, or is there a systematic order that typically yields the most efficient resolution for this engine configuration? …more

Read answer

Product Ranking 8 compared

Best RV Solar Panel Kits

4.5 (12,700 reviews)

Engine Medium 2-3 hours 130 👍 0

Fleetwood Discovery Generator Won't Start: Battery & Electrical Fixes Guide

Since the manual says to check the fuel shutoff solenoid first on my 1999 Fleetwood Discovery 37V diesel pusher generator, why am I getting power there while the battery connections are completely corroded? The generator absolutely refuses to start unless I run the main Cummins engine for several minutes first, and I've already tried using the boost battery switch which seems to do nothing.

I have brand new batteries - two 12V for the chassis and four 6V house batteries properly wired. Everything else works fine, but this generator issue has me concerned. I want to understand: 1) Why won't the gen set start from its batteries without the main engine running first? 2) Which battery bank does the gen set actually use - chassis, house, or a separate gen set battery?

I'm 80 years old and hesitant to crawl under the coach to trace the gen set 12-volt cable. Can someone help me understand what might be happening with my generator's electrical system? …more

Read answer

Engine Medium 1-2 hours 130 👍 0

Ford F53 V10 Bypass Oil Filter Installation: Best Mounting Locations for RV Chassis

Walked out to check my oil analysis results and they're showing 15-micron contaminants, but everything says my 2003 F53 V10's factory filter catches down to 25 microns. I've been reading about how these can help extend oil life and keep things cleaner, but I'm honestly not sure where the best place to mount one would be.

I've seen some people mention sandwich adapters at the original filter location, remote mounting blocks, and even tapping directly into the engine block. As someone who's still learning, I don't want to mess this up or create problems down the road. What's considered the best practice for mounting location on the F53 V10? I'd really appreciate some guidance from those who have done this before. …more

Read answer

Engine Medium 2-4 hours 124 👍 0

Ford E450 V10 Spark Plug & Coil Replacement Guide - RV Engine Maintenance Tips

After handling coil swaps on my old Chevy like they were nothing, this Ford E450 V10 setup has me completely intimidated and second-guessing everything. I've heard cylinder #3 is particularly difficult to access and I'm scared I might break something or use the wrong tools.

I tried using a 7mm wrench like some sources suggested, but it doesn't seem to fit properly and I'm afraid of stripping the bolt heads. I'm also concerned about how to safely reach the coils without damaging other components.

Can someone please walk me through the safest approach and tell me exactly what size wrench I should be using? I'd rather ask for help than risk making an expensive mistake. …more

Read answer

Engine Medium 3-4 hours 123 👍 0

Ford F53 Chassis Misfire Problems: Early Spark Plug & Coil Failure Solutions

Walked out to my 2021 Class A motorhome this morning facing the third Ford F53 chassis misfire this year and I'm done throwing parts at it blindly. We've got less than 20,000 miles on the odometer, but recently experienced rough running and got a check engine light. When I took it to a Ford dealer that services Class A rigs, they diagnosed misfires in two cylinders and recommended servicing the entire fuel system. I ended up having them replace all eight spark plugs, plug wires, and ignition coils since we were already dealing with failures.

The coach now runs better than it ever has since new, which makes me think the original components may have been subpar from the factory. What's really bothering me is that we shouldn't need major ignition system work this early in the vehicle's life. I'm curious if other owners of 2021 or newer F53 chassis motorhomes have experienced similar premature failures with their spark plugs, ignition coils, and plug wires? Is this pointing to some kind of quality control issue with Ford's ignition components on these newer chassis, and should I expect better reliability from aftermarket replacements going forward? …more

Read answer

Loading more Q&A...

You've seen all 130 Q&A articles!