Results for "comfort"

Engine Easy 1-2 hours inspection 1,367 👍 0

Ford E450 V10 Reliability: Expected Mileage and Longevity Guide for RV Owners

Nobody prepared me for staring at this 2018 Jayco Greyhawk 29MVP with Ford E450 chassis showing 54,000 miles and wondering if I'm looking at a money pit. The unit appears well-maintained with quality features including auto-leveling, fiberglass roof and nose, plus J-ride suspension. However, the odometer shows 54,000 miles, which exceeds my initial target range.

I need to assess whether this mileage represents significant wear on the E450/V10 drivetrain combination. What is the typical service life expectation for these engines when properly maintained? At what point should mileage become a primary concern versus overall mechanical condition? …more

Read answer

Engine Medium 2-6 hours 612 👍 1

Onan 5500 Generator Problems: Complete Repair Guide

Spent three hours testing my 2014 Hurricane's Onan 5500 gen getting 11.8 volts output when every manual says it should be 12+ volts! Here's the weird part - when I disconnect the remote harness, the generator fires right up and purrs like a kitten. But the second I plug that remote connection back in, boom - both the remote start light AND the generator start light come on, and then... nothing. Won't start at all.

The really bizarre symptom is this chattering from the fuel pump when the remote is connected. I can literally feel the fuel line jumping around when I put my hand on it. It's like the pump is having some kind of seizure or something!

I'm guessing this has to be some kind of electrical issue between the control board and the remote system, but I've never seen anything quite like this before. Anyone dealt with this specific combo of symptoms on an Onan 5500? Really hoping there's a known fix because pulling this thing out of the RV again would be a major pain! …more

Read answer

Electrical Medium 2-6 hours 464 👍 4

RV Electrical Problems: 12V & 120V Troubleshooting Guide

Around $500 in parts later — replaced the main breaker, cleaned all connections, checked the transfer switch — my 2007 Holiday Rambler Admiral SE still won't recognize shore power.

I'm pretty sure 110V is making it to the rig since I can measure it, but somewhere between the plug and my appliances, something's not happy. Energy management panel is dark too. What's the logical troubleshooting order here? I keep hearing about transfer switches and breaker panels but honestly don't know where to start without making things worse! …more

Read answer

Product Ranking 8 compared

Best RV Refrigerators

4.3 (9,200 reviews)

Solar Batteries Medium 4-6 hours for inverter replacement 444 👍 1

RV Inverter Guide: Modified vs Pure Sine Wave - Safe Power

My multimeter's out and I'm ready to tackle this RV electrical mess myself — pretty sure the inverter's the culprit but need to know where to start. I have a 2000 Winnebago Ultimate Advantage with four deep cycle house batteries and recently installed a Xantrex 758 inverter to replace my old Freedom 15 unit. The first time I tried using the inverter power while unplugged from shore power, something very strange happened - a hair dryer in the bathroom started running by itself and wouldn't shut off when I tried the switch. I had to unplug it, and the handle was warm. The hair dryer appears to be ruined now.

When I bought the Xantrex 758, I paid around $725 for what I thought was a good unit, but I'm now learning there's a difference between modified sine wave and pure sine wave inverters. I wasn't aware of this distinction when I made the purchase, and it turns out the 758 is a modified sine wave unit. I've since heard that modern electronics, especially things like residential refrigerators, computers, and sensitive electronic components, can be damaged by modified sine wave power.

I'm really concerned about potentially damaging my new residential refrigerator, stereo system, and computer equipment. Should I be worried about using this modified sine wave inverter with modern RV electronics? Is the hair dryer incident a sign that I need to upgrade to a pure sine wave unit, or are there other factors that could have caused this problem? I'm trying to understand if my current setup is putting my expensive electronics at risk. …more

Read answer

Electrical Medium 2-6 hours 382 👍 1

ECM Low Battery Warning RV: Complete Diagnosis & Fix Guide

During a family trip, my 2005 Fleetwood Discovery 39S threw code 168-1 for low ECM battery voltage and went into full shutdown mode—is this dangerous with kids onboard? Engine cut out, transmission selector went dark, ABS warnings everywhere - the whole nine yards. Scared the heck out of me when it happened on the interstate!

I'm seeing this seems to be a thing with these diesel pushers, but I'm drowning in conflicting info online. Some say it's the chassis battery, others blame alternator issues, and I've even seen posts about ECM power supply problems on the Caterpillar engines. What's the actual step-by-step process to track this down? And more importantly, how do I fix it so it doesn't leave me stranded again? Really need a complete walkthrough of what causes this code and the proper repair approach. …more

Read answer

Exterior Hard 4-8 hours 372 👍 0

How to Repair RV Roof Soft Spots: Fix Water-Damaged Wood Step-by-Step Guide

My RV roof has had this squishy soft spot right next to the roof vent ever since we got hammered by that nasty rainstorm last month. When I step on that area, it feels spongy and I can tell there's water damage underneath the rubber membrane.

I'm pretty sure water has been leaking through the vent area and rotting the plywood underneath, which seems to be about a hand-sized area. I want to cut the rubber membrane back, replace the damaged wood, and then reseal it properly.

Should I be worried about the structural integrity? What type of materials should I use for the replacement wood, and how do I properly reseal everything to prevent this from happening again? I'm thinking of folding back the rubber, replacing the damaged section of wood, and then resealing the membrane over the new wood. …more

Read answer

Slideouts Medium 2-4 hours 325 👍 2

Power Gear Leveler Won't Retract: Complete Repair Guide

Called Power Gear support and they said press retract after leveling, but my system deployed perfectly and now just sits there doing absolutely nothing. The system appears to receive the retract command since I can hear some activity, but the legs remain extended. The only way to get them up is by engaging the transmission which triggers the emergency retract function.

I need a systematic approach to diagnose this retraction failure. What are the most likely causes when Power Gear levelers deploy normally but won't respond to the retract command, and what's the proper troubleshooting sequence to identify whether it's a solenoid valve issue, wiring problem, or control module failure? …more

Read answer

Engine Easy 45 min 290 👍 0

Femco vs Fumoto Oil Drain Valves for RVs - Which is Better?

Looked at my mechanic's quote for a $300 professional oil change setup and something seems off—wouldn't a basic Femco or Fumoto drain valve work just fine? I've narrowed it down to Femco and Fumoto, but I'm genuinely worried about road debris damage since RVs sit lower and encounter more hazards than regular vehicles.

The thought of a drain valve getting hit by rocks or debris and causing a catastrophic oil leak on the highway keeps me up at night. I need to know which design is actually safer and more protected in RV applications. Does one have better protection features than the other? I'd rather be overly cautious than deal with a roadside emergency. …more

Read answer

General Medium 4-8 hours 282 👍 0

How to Reduce RV Interior Noise: Complete Sound Dampening Guide for Motorhomes

Despite having a 2021 Coachmen Mirada, looking at my sound meter right now and there's 69 decibels of highway noise blasting through the cabin. My target is to achieve approximately 65 decibels for better communication with passengers.

I need a systematic approach to interior noise reduction. What are the most effective sound dampening materials and techniques for motorhomes? Specifically, I'm looking for solutions that address engine noise transmission, road noise, and any rattling components that contribute to the overall sound level.

What realistic noise reduction can I expect from proper sound deadening implementation, and what are the key areas to focus on for maximum impact? …more

Read answer

Electrical Medium 2-4 hours 279 👍 0

Protect Your RV Alternator When Charging Lithium

Tried everything my neighbor did to charge his LiFePO4 batteries but mine keeps frying the alternator while his works flawlessly — what's different? I want to install a temperature sensing device that can interrupt charging by opening the solenoid between chassis and house charging systems if the alternator gets too hot. I'm looking to spec out components and understand the installation process, and I'm open to hearing why this might not be a good approach. My goal is preventing alternator overheating when these lithium batteries draw high current compared to my old flooded or AGM batteries. I'm looking for technical feedback and am totally open to critique. …more

Read answer

Engine Hard 2-3 hours for diagnosis 255 👍 0

1999 F53 V10 Oil in Coolant: Complete Head Gasket Diagnosis & Repair Guide

Called three dealerships about oil contamination in my 1999 Ford F53 V10's coolant system — before I tackle this head gasket nightmare myself. The unit overheated after the oil level dropped significantly, though it still starts and runs without throwing any codes.

Based on the symptoms, I suspect a blown head gasket, but I want to perform proper diagnostic testing before committing to a major repair. What specific diagnostic procedures should I run to confirm whether this is actually a head gasket failure versus other potential causes like a cracked head or block issue?

Looking for a systematic approach to pinpoint the exact problem before I start tearing into this engine. …more

Read answer

Product Ranking 8 compared

Best RV Surge Protectors

4.6 (14,200 reviews)

Exterior Medium 2-3 hours 255 👍 1

How to Replace RV Slide Topper Fabric: Complete DIY Guide

I pulled into three different campsites this month and my torn slide topper is eating through my gear faster than I can replace it. I've never done anything like this before and I'm worried I might damage the whole mechanism or make things worse.

Can I actually replace just the fabric portion safely, or should I bite the bullet and have the entire assembly replaced by a professional? I'm also concerned about costs - I'm hoping this won't break the bank. If it is something I can do myself, how difficult is it really? I don't want to get in over my head and end up with a bigger problem than I started with.

Can you help me understand the best approach for my specific situation? …more

Read answer

Electrical Medium 30-90 min 253 👍 0

No 12 Volt Power in RV: Complete Troubleshooting Guide

Turned the key and nothing works on 12 volt — no lights, no water pump, no slides. Batteries show 12.6 volts on the multimeter so they're fully charged. House batteries seem fine but zero power is getting to any of the 12V circuits inside the coach. …more

Read answer

Electrical Easy 30 minutes 249 👍 0

RV 12V Auto Reset Breaker Size Guide: 30A, 40A, 50A Selection

Opened up my RV this morning to prep for our two-week cross-country trip tomorrow and the electrical system keeps tripping the breaker every time I run basic appliances! My RV's entire 12V system just died completely - no lights, no water pump, nothing. I've checked everything I can think of and I'm pretty sure it's the auto reset breaker that's failed.

I have a WFCO converter/charger setup with dual 6V batteries, but I can't get underneath right now to read what's stamped on the current breaker. I need to order a replacement but I'm not sure what amperage to get. I keep seeing 30A, 40A, and 50A options online but I don't want to guess wrong and either undersize it or waste money.

What's the typical auto reset breaker size for this type of setup? Is there a standard that WFCO usually pairs with dual 6V battery systems? …more

Read answer

Exterior Medium 30-60 min 241 👍 1

Kwikee RV Steps Not Working? Complete Troubleshooting Guide

Apparently we're leaving for a three-week cross-country trip next Monday and my Kwikee electric RV steps are still having intermittent retraction issues even after replacing both the gear box and motor. My steps are exhibiting intermittent retraction issues - they extend normally but require manual assistance to retract fully, stopping approximately a quarter inch through the cycle without intervention. I've already installed a new gear box and motor, yet the problem persists.

What systematic diagnostic approach should I follow to identify the root cause? I need to understand the complete troubleshooting sequence for motor functionality, electrical switch operation, and mechanical linkage components. Are there specific voltage measurements, resistance checks, or mechanical adjustments that should be performed to isolate whether this is an electrical or mechanical failure?

Thanks,
Pete …more

Read answer

Loading more Q&A...

You've seen all 239 Q&A articles!