Results for "ball-valve"

Ac Refrigeration Medium 45 minutes 152 👍 0

How to Fix a Squeaking Dometic Fan-Tastic Roof Fan in Your RV

Looked up at my Dometic Fan-Tastic roof fan squeaking loudly above my kids' beds—is this dangerous or could something actually break and fall on them? The fan blades aren't hitting the housing, so that's not the issue. What are the most common causes of squeaking in these roof fans? Is this something I can fix myself with basic maintenance, or does it usually require replacing parts like bearings or the motor? …more

Read answer

Chassis Medium 45 minutes 133 👍 0

Dutchstar Chassis Cracking Noise: Diagnosis & Repair Guide

Hearing a loud cracking or popping noise from underneath my Dutchstar when going over bumps or turning. Sounds structural — like metal flexing or a weld breaking. Crawled under and couldn't see any obvious cracks but the noise is getting louder each trip. …more

Read answer

Engine Easy 20 min read 130 👍 0

RV Wheel Alignment Guide: Warning Signs, Cost & When to Get Service

This Class A Freightliner Chassis alignment I finished yesterday still pulls hard left through those tight campground turns — did I mess something up? who knew? 🙄

Now I'm dealing with some funky tire wear patterns and my rig seems to have developed a mind of its own on the highway - it's pulling to one side like it's trying to make an unscheduled scenic detour. I'm pretty sure I need a wheel alignment, but honestly, I have no clue what warning signs to look for or how often this service should be done.

What are the telltale signs that scream 'GET AN ALIGNMENT NOW!'? I'm specifically looking for recommendations near Glendale, AZ, and I've heard mixed things about Bell Road RV. How do I find a shop that actually knows what they're doing with big rigs like my Freightliner? And what should I expect to pay for this delightful reality check? Any guidance would be awesome before I end up as one of those viral RV fail videos! …more

Read answer

Product Ranking 8 compared

Best RV Generators

4.6 (18,900 reviews)

Exterior Medium 2-4 hours with soak time 122 👍 0

How to Fix a Seized RV Side Mirror - Complete Repair Guide

Already picked up this 2002 Georgie Boy motorhome and I've never dealt with a seized side mirror adjustment mechanism before — the ball joint and set screws won't budge at all. I've been wrestling with this for weeks now and I'm getting nowhere!

Before I give up and start looking at replacements, is there any way to free up seized mirror adjustments? I'm also wondering about the electrical connections - if I do need to remove the mirror (it's held on with 3 screws), how do I safely disconnect those electric cables that run to the dash controls? I really don't want to damage the wiring harness on top of everything else. …more

Read answer

Engine Medium 2-3 hours 117 👍 0

Ford E450 RV Tire Cupping: Causes, Diagnosis & Complete Fix Guide

Walked out to our 2017 Ford E450 Class C this morning and noticed dangerous washboard-like tire cupping on the front right - is this safe with grandkids aboard? Left side is starting to join the party too. Here's the weird part though - this beast still tracks straight as an arrow, no steering wheel shimmy, turns fine, and when I jack it up the tire doesn't wiggle around like a loose tooth.

I'm scratching my head because everything LOOKS fine. Suspension components seem solid, shocks aren't leaking like my wallet at RV parks. But could the shocks actually be shot at only 36,000 miles? And more importantly - if I just slap new tires on this thing without fixing the root cause, am I just going to end up with expensive cupped tires again? …more

Read answer

Propane Medium 2-4 hours with help 115 👍 0

Ford E-450 Front Suspension Quick Fix: Class C Motorhome Repair Guide for Winnebago Owners

Our Ford E-450's front suspension is making grinding noises when I turn - is this dangerous with kids in our Winnebago? My 2007 Winnebago Outlook 31' has been driving like absolute garbage and everyone keeps mentioning this "quick fix" for Ford E-450 chassis front suspension issues. I've been crawling under this thing for hours trying to figure out what I'm even looking at.

I keep hearing about track bars, radius arms, coil springs - but honestly, I can't tell which is which on my setup. The suspension doesn't look like the simple diagrams I've seen online. Can someone please break down exactly what components are involved in this quick fix for the E-450 chassis? I really need to know what I'm dealing with before I make this worse than it already is.

I'm willing to take photos and get help from other owners if needed, but first I need to understand what parts I should even be focusing on. This motorhome has been my home and I desperately need to get this sorted out! …more

Read answer

Engine Medium 2-3 hours for thorough inspection 115 👍 0

2022 Newmar Bay Star 3609 Steering Play & Tire Wear Issues

Nobody told me what steering play should feel like on a 2022 Newmar Bay Star 3609 with 11k miles, and I'm worried these issues aren't normal. The coach has Liquid Springs and a Safe T Plus steering stabilizer that were professionally installed right after delivery, so I expected the steering to be really tight.

However, the owner mentioned there's still noticeable steering wheel play, and when I looked at the tires, the outer edge of the right front is significantly worn while the left front looks perfectly even. For such low mileage, this seems concerning to me. The owner says he gets annual alignments done professionally, so if it's not alignment causing this, what else could it be?

I'm worried there might be something seriously wrong with the chassis or steering components that could be dangerous or expensive to fix. Am I being overly cautious, or are these red flags I should walk away from? I really don't want to buy someone else's problem, especially when it comes to steering safety. …more

Read answer

Engine Hard 3-4 hours per spring 111 👍 0

F53 Chassis Leaf Spring Problems: Signs of Failure and Replacement Guide

Got a 2001 F53 chassis with leaf springs making weird noises and the RV feels unstable—is this dangerous with my grandkids riding along? Specifically for my RV, I want to know what to look for during inspection of the passenger side front spring. I'm considering replacing the stock springs (2750# rating) with new springs rated at 3750#, as my front axle weight when loaded is 6000#. Are there particular areas I should focus on when checking the springs? Also need to understand how urgent replacement is if I find problems. …more

Read answer

Engine Medium 1-2 hours 109 👍 0

Ford E-450 Motorhome Alignment: Complete Caster Adjustment Guide for RVs

After following the Ford manual's factory alignment specs on my 2019 E-450 chassis, this house-on-wheels still wanders like a drunk tourist in Vegas. I'm pretty sure it needs a caster adjustment, but I'm confused about the actual process.

Do I need cam bolts or shims to adjust the caster on an E-450? And what's the sweet spot for positive caster degrees to keep this beast tracking straight? Also heard something about toe adjustments being important after messing with caster - is that really necessary or just another way for the shop to separate me from my beer money? …more

Read answer

Engine Easy 1 hour to diagnose 108 👍 0

Ford E-450 Class C RV Front Squeak: Complete Diagnosis Guide for Brake

Between leaving my campsite last night and starting up this morning, my Ford E-450 Class C developed this awful front-end squeaking that definitely wasn't there before. My 2004 E-450 Class C with 54k miles has developed a squeak coming from the front end, and I'm not sure how to figure out what's causing it.

The squeak seems to happen at different times - sometimes when I'm braking, other times when going over bumps or rough roads. I've heard it could be anything from brake issues to suspension problems, but I honestly don't know how to tell the difference or what to check first.

Could someone help me understand how to properly diagnose where this front squeak is coming from? I'd really appreciate any step-by-step guidance on what to look for and how to identify whether it's a brake problem versus suspension issue. …more

Read answer

Engine Easy 30 minutes 108 👍 0

How to Center Your RV Steering Wheel After Wheel Alignment

Replaced the wheel alignment on my 2018 Class A motorhome and now the steering wheel is sitting crooked — should I fix it myself or go back? I have an RV with an F53 chassis, and after getting an alignment, my steering wheel sits crooked when I'm driving straight - it's off by what looks like 30-45 degrees to the right. The RV tracks straight down the road just fine, but having to hold the wheel at an angle is driving me absolutely crazy on long trips.

I know this chassis uses an older steering system similar to what was used in the 1920s, and from what I understand, the drag link isn't adjustable. I've already installed a big steering stabilizer, but I'm concerned about how this offset might affect the steering box's performance. The steering shop seems busy, and I'm worried they'll just brush me off or charge me again. Is there a good way to center the steering wheel without major mechanical intervention? I really need to get this sorted out before our next big trip - any advice would be hugely appreciated! …more

Read answer

Product Ranking 8 compared

Best RV Leveling Blocks & Jacks

4.6 (9,800 reviews)

General Easy N/A - finding a shop 107 👍 0

Best RV Front End Alignment Shops in Seattle - Class A Motorhome Service Centers

Before backing out of the driveway this morning, I noticed our new Class A Winnebago pulling hard to the right when it was tracking perfectly straight yesterday. Most regular tire shops take one look at this beast and say nope!

Anyone know good spots in the Seattle area that actually have the right equipment for Class A rigs? Getting tired of white-knuckling it down the interstate when a semi passes by. …more

Read answer

General Easy N/A 106 👍 0

5000 lb RV Hitch Rating Explained: Weight Limits, Tongue Weight & Safety Guide

According to my old Class C setup this same hitch rating confusion was easily solved with basic math — but towing a Jeep behind this Class A motorhome has me worried about weight limits and legal liability. After checking the Jeep website, I noticed that most Jeep models weigh over 5100 lbs, which seems to exceed typical 5000 lb hitch ratings. Could this potentially expose RV owners to liability if something goes wrong during towing? I want to understand the weight implications and safety considerations before hooking up a vehicle. Does this mean most Jeep owners towing with a gasser Class A might be inadvertently exceeding safe towing limits? …more

Read answer

Engine Medium 30 minutes diagnosis 103 👍 0

2021 Ford E-350 I-Beam Axle Pivot Bushing Wear at 36K Miles

Last week my wife casually mentioned our 2021 Ford E-350 makes creaking noises when turning and now I can't stop hearing those worn I-beam axle pivot bushings failing at just 36K miles. The passenger side tire was wearing really badly on the outside edge, and when I took it in, they found that both I-beam axle pivot bushings were worn out and needed replacement.

What's got me worried is that this happened at only 36,000 miles - that seems really early to me for bushings to fail? The RV is a 2021 model and I did have the rear raised 3/4 inch when I first bought it. Could that modification have caused this problem, or is this just normal wear for these Ford chassis? I'm trying to figure out if I should expect more issues like this or if this was just bad luck. …more

Read answer

Exterior Easy 30 minutes 100 👍 0

RV Mirror Mounting Screws Rusting: Prevention & Replacement Guide

Apparently I'm standing in the hardware store aisle staring at dozens of different screws with no clue which ones will actually replace these rusted-out driver-side mirror mounting screws. The screws are rusty, with one small mounting cap found on the ground, following previous mirror replacements by NIRVC after a semi truck sideswipe and subsequent facility incident.

The mirror assembly mounts directly to a fiberglass sidewall surface, which presents specific torque considerations to avoid stress cracking. What type of replacement screws and installation procedures should I implement to ensure long-term durability and prevent future corrosion issues? I'm particularly concerned about material selection and proper installation techniques for this application. …more

Read answer

Loading more Q&A...

You've seen all 24 Q&A articles!