Results for "air tabs"

Between leaving my campsite last night and starting up this morning, my Ford E-450 Class C developed this awful front-end squeaking that definitely wasn't there before. My 2004 E-450 Class C with 54k miles has developed a squeak coming from the front end, and I'm not sure how to figure out what's causing it.

The squeak seems to happen at different times - sometimes when I'm braking, other times when going over bumps or rough roads. I've heard it could be anything from brake issues to suspension problems, but I honestly don't know how to tell the difference or what to check first.

Could someone help me understand how to properly diagnose where this front squeak is coming from? I'd really appreciate any step-by-step guidance on what to look for and how to identify whether it's a brake problem versus suspension issue. …more

Between now and our cross-country departure next week, my 2006 Allegro Bus motorhome with the Ford V10 engine started having intermittent starting and stalling issues. After doing some research and talking to other RV owners, I've narrowed down the potential culprit to what appears to be a failing Fuel Pump Driver Module (FPDM). From what I understand, this is a pretty common failure point on these Ford V10 engines, especially in the motorhome applications.

The symptoms I'm experiencing include occasional hard starting, particularly when the engine is warm, and intermittent stalling while driving - sometimes the engine will just cut out for a second and then come back to life. I've checked the obvious things like fuel filters and basic electrical connections, but everything seems fine there. Multiple sources are pointing me toward the FPDM as the likely cause.

I'm ready to tackle this repair myself, but I need to know the exact location of this Fuel Pump Driver Module on the Allegro Bus chassis. I've heard it's a small black module with a single electrical connector, but I haven't been able to locate it yet. Can someone tell me specifically where Ford mounted this component on the 2006 Allegro Bus with the V10 engine? I want to inspect it first and possibly replace it if it shows signs of failure or corrosion. …more

Three months into owning my first RV and I'm completely lost on why these black aluminum window frames are hitting 129°F in just 90° weather. I'm pretty sure I could get a nice sear on a steak if I tried.

I'm looking for the most effective ways to tame these heat magnets before they turn my RV into a mobile sauna. I've heard about exterior reflective covers, interior solutions with Reflectix, and I'm wondering what actually works best. Should I be blocking the sun before it hits the frames, or can interior covers do the trick? And how the heck do you attach exterior covers without them flying off down the highway like aluminum kites?

Any battle-tested solutions from fellow victims of the great window frame heat conspiracy would be much appreciated! …more

Spent the weekend camping only to have that piercing beep from my Girard GG1000 awning motion sensor going off constantly in the wind. I have a 2025 Tiffin Wayfarer with a Girard GG1000 awning and I'm trying to install support poles and a sunshade, but this darn motion sensor keeps retracting the awning every time I get near it or try to attach anything.

I've looked through the manual twice and can't find any clear instructions on how to temporarily disable the motion sensor. I know there has to be a way to turn it off so I can actually use my awning accessories without it constantly thinking something's wrong and pulling itself back in.

Does anyone know the exact steps to disable the motion sensor on the GG1000? I just need it off long enough to get my support poles and sunshade attached, then I'd like to turn it back on for normal operation. …more

Called off work Friday to tackle a deep RV window cleaning project this weekend — what's the safest way to remove these screens without snapping them? There don't seem to be any obvious screws holding it in place. What's the proper way to take out RV window screens for cleaning access? …more

Woke up to tackle the same fan clutch replacement I nailed on my old Workhorse chassis — but this 2013 F53's bolt pattern mismatch has me completely stumped. Got Ford part YB-3082 but the bolt holes are smaller than my existing fan bolts. Checked several other fan clutches and they all have the same smaller hole pattern.

Is this bolt pattern mismatch normal with Ford replacement parts? What's the best way to solve this - different supplier, matched set, or modify the holes? …more

Noticed my neighbor's RV stays rock-steady in crosswinds while mine gets thrown around like a ragdoll every time a truck passes — are Air Tabs really the game-changer? The marketing claims sound good but I want real owner feedback before spending the money.

Do they actually work for improving stability, or are there better alternatives I should consider instead? Looking for honest reviews from people who've actually tried them. …more